If you made any changes in Pure these will be visible here soon.

Research Output 2000 2019

Filter
Conference contribution
2018

Spray performance of alternative jet fuel based nanofuels at high-ambient conditions

Soltan, M., Al Abdulla, B., Al Dosari, A., Kannaiyan, K. & Sadr, R., 1 Jan 2018, Fluids Engineering. American Society of Mechanical Engineers (ASME), Vol. 7.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jet fuel
Alternative fuels
Nanoparticles
Liquids
Atomization
2016
1 Citation (Scopus)

Experimental and numerical characterization of droplet-induced spreading-splashing transition in surface cooling

Zhang, T., Muthusamy, J. P., Alvarado, J., Kanjirakat, A. & Sadr, R., 2016, Heat Transfer in Multiphase Systems; Gas Turbine Heat Transfer; Manufacturing and Materials Processing; Heat Transfer in Electronic Equipment; Heat and Mass Transfer in Biotechnology; Heat Transfer Under Extreme Conditions; Computational Heat Transfer; Heat Transfer Visualization Gallery; General Papers on Heat Transfer; Multiphase Flow and Heat Transfer; Transport Phenomena in Manufacturing and Materials Processing. American Society of Mechanical Engineers, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooling
Heat transfer
Electric heating elements
Gas generators
Aluminum Oxide

Influence of nanoparticles on spray performance of alternative jet fuels

Kannaiyan, K. & Sadr, R., 2016, Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems. American Society of Mechanical Engineers (ASME), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jet fuel
Alternative fuels
Nanoparticles
Liquid fuels
Fuel additives
4 Citations (Scopus)

Theoretical prediction of laminar burning speed and ignition delay of gas to liquid fuel

Yu, G., Askari, O., Hadi, F., Wang, Z., Metghalchi, H., Kannaiyan, K. & Sadr, R., 1 Jan 2016, Energy. American Society of Mechanical Engineers (ASME), Vol. 6A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid fuels
Ignition
Reaction kinetics
Time delay
Gases
2014
1 Citation (Scopus)

Design of a mini heat sink based on constructal theory for electronic chip cooling

Srinivasan, S., Al-Suwaidi, S. & Sadr, R., 1 Jan 2014, ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2014, Collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Temperature distribution
Cooling
Fluids
Cooling systems

Experimental study of the effect of fuel properties on spray performance of alternative jet fuel

Kannaiyan, K. & Sadr, R., 2014, Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jet fuel
Alternative fuels
Liquid fuels
Gases
Physical properties

Thermal and hydraulic characteristics of SCO2 in a horizontal tube at high reynolds number

Tanimizu, K., Sadr, R. & Ranjan, D., 2014, Proceedings of the 15th International Heat Transfer Conference, IHTC 2014. Begell House Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

high Reynolds number
hydraulics
Reynolds number
heat transfer
Hydraulics
2013
2 Citations (Scopus)

A numerical approach in predicting flow field induced by randomly moving nano particles

Cheng, W. L. & Sadr, R., 2013, ASME 2013 4th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2013. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow fields
Fluids
Navier Stokes equations
Flow of fluids
Statistics
1 Citation (Scopus)

Application of nanofluids in a shell-and-tube heat exchanger

Cox, J., Baby, A. & Sadr, R., 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T02A003

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofluid
Heat Exchanger
Tubes (components)
Heat exchangers
Shell
4 Citations (Scopus)

Spray characteristics of Fischer-Tropsch alternate jet fuels

Kannaiyan, K. & Sadr, R., 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jet fuel
Liquid fuels
Gases
Physical properties
Synthetic fuels
1 Citation (Scopus)

Viscosity measurements of nanofluids at elevated temperatures and pressures

Baby, A., Taimour, K., Al-Jubouri, M., Sadr, R. & Amani, M., 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T11A003

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nanofluid
Viscosity measurement
Viscosity
Fluids
Temperature
2012
2 Citations (Scopus)

Experimental investigation of heat transfer characteristics of pseudocritical carbon dioxide in a circular horizontal tube

Tanimizu, K. & Sadr, R., 2012, ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012. Vol. 1. p. 297-302 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon Dioxide
carbon dioxide
Carbon dioxide
heat transfer
tubes
1 Citation (Scopus)

Heat transfer performance of SIO2-water nanofluid in a plate heat exchanger

Baby, A. & Sadr, R., 2012, ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012. Vol. 1. p. 267-272 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

heat exchangers
Heat exchangers
heat transfer
Heat transfer
pressure drop

Numerical simulation of coaxial turbulent jet with and without discrete particles

Kannaiyan, K. & Sadr, R., 2012, Advances in Fluid Mechanics IX. Vol. 74. p. 345-359 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

turbulent jets
Coaxial
Flow fields
Numerical Simulation
Flow simulation
2011
19 Citations (Scopus)

Effect of GTL-like jet fuel composition on GT engine altitude ignition performance - Part I: Combustor operability

Fyffe, D., Moran, J., Kannaiyan, K., Sadr, R. & Al-Sharshani, A., 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A AND B ed. Vol. 2. p. 485-494 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jet fuel
Combustors
Ignition
Engines
Kerosene
21 Citations (Scopus)

Investigation of GTL-like jet fuel composition on GT engine altitude ignition and combustion performance part II: Detailed diagnostics

Mosbach, T., Gebel, G. C., Le Clercq, P., Sadr, R., Kannaiyan, K. & Al-Sharshani, A., 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A AND B ed. Vol. 2. p. 507-517 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jet fuel
Ignition
Chemiluminescence
Luminance
Engines
2010
1 Citation (Scopus)

Effect of non uniform out-of-plane illumination and shear rate on the accuracy of nPIV velocity measurements

Khader, R. G. & Sadr, R., 2010, ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B ed. p. 681-689 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Velocity measurement
Shear deformation
Lighting
Shot noise
Fluids
2009
1 Citation (Scopus)

Evaluating the influence of charge motion control on in-cylinder flow using MTV

Mittal, M., Schock, H. J. & Sadr, R., 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008. PART B ed. Vol. 10. p. 819-827 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motion control
Engine cylinders
Velocity measurement
Engines
Flow measurement
2005

An evanescent wave velocity measurement technique for microfluidic applications

Fourguette, D., Yoda, M., Sadr, R., Li, H. & Wilson, D., 2005, ICIASF'05 Record - 21st International Congress on Instrumentation in Aerospace Simulation Facilities, 2005. Vol. 2005. p. 257-261 5 p. 1569931

Research output: Chapter in Book/Report/Conference proceedingConference contribution

evanescent waves
velocity measurement
Microfluidics
Velocity measurement
Waveguides

Plenary: Near-wall measurements in electroosmotic flow and inside the diffuse electric double layer

Sadr, R. & Yoda, M., 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. p. 12726 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric fields
Electroosmosis
Sodium borate
Fluids
Ionic strength
2004
2 Citations (Scopus)

Nano-particle image velocimetry (nPIV): A new technique for measuring near-wall velocity fields with submicron spatial resolution

Yoda, M. & Sadr, R., 2004, 42nd AIAA Aerospace Sciences Meeting and Exhibit. p. 8686-8693 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Velocity measurement
NEMS
Sodium borate
Steady flow
Microchannels