If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

Filter
Conference contribution
2019

Experimental investigations of a comb-like film cooling scheme

Li, H. M., Ghaly, W. & Hassan, I., 1 Jan 2019, Fluid Applications and Systems. American Society of Mechanical Engineers (ASME), 4695. (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 3B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural integrity
Vortex flow
Cooling
Liquid Crystals
Coolants
2018

Two-phase flow visualization for a hybrid heat sink

Rahman, D., Almomani, A., Hassan, I., Al-Hamidi, Y. & Rahman, A., 1 Jan 2018, Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics. American Society of Mechanical Engineers (ASME), Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Flow visualization
Two phase flow
Flow rate
Air
2017

Analysis of film cooling with high-aspect-ratio holes: Heat transfer mechanisms

Li, H. M., Ghaly, W. & Hassan, I., 1 Jan 2017, Aerospace Heat Transfer; Computational Heat Transfer; Education; Environmental Heat Transfer; Fire and Combustion Systems; Gas Turbine Heat Transfer; Heat Transfer in Electronic Equipment; Heat Transfer in Energy Systems. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

film cooling
high aspect ratio
Aspect ratio
heat transfer
Heat transfer

Experimental study of a single microchannel flow under nonuniform heat flux

Eltaweel, A., Baobeid, A. & Hassan, I., 1 Jan 2017, Heat Transfer Equipment; Heat Transfer in Multiphase Systems; Heat Transfer Under Extreme Conditions; Nanoscale Transport Phenomena; Theory and Fundamental Research in Heat Transfer; Thermophysical Properties; Transport Phenomena in Materials Processing and Manufacturing. American Society of Mechanical Engineers, Vol. 2. HT2017-4795

Research output: Chapter in Book/Report/Conference proceedingConference contribution

microchannels
Microchannels
Heat flux
heat flux
heat transfer
2016
1 Citation (Scopus)

Numerical investigation of heat transfer characteristics of a novel wavy-tapered microchannel heat sink

Eltaweel, A., Tompkins, B., Baobeid, A. & Hassan, I., 2016, Heat Transfer in Multiphase Systems; Gas Turbine Heat Transfer; Manufacturing and Materials Processing; Heat Transfer in Electronic Equipment; Heat and Mass Transfer in Biotechnology; Heat Transfer Under Extreme Conditions; Computational Heat Transfer; Heat Transfer Visualization Gallery; General Papers on Heat Transfer; Multiphase Flow and Heat Transfer; Transport Phenomena in Manufacturing and Materials Processing. American Society of Mechanical Engineers, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Microchannels
Heat transfer
Heat resistance
Aspect ratio
2015

Aero-Thermal shape optimization for the discrete film cooling of a turbine airfoil

Ayoubi, C. E., Ghaly, W. & Hassan, I., 2015, Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers (ASME), Vol. 8B-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape optimization
Airfoils
Turbines
Cooling
Aerodynamics

Experimental investigation on flow instability in a single vertical microtube

You, Q., Hassan, I. & Kadem, L., 2015, ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2015, collocated with the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mass transfer
Heat flux
Boiling liquids
Pressure drop
Dielectric liquids

Experimental investigations of the effect of scheme exit height and double row injection on the film cooling performance of a micro tangential jet scheme, part i: Pressure side

Hassan, O. & Hassan, I., 2015, ASME 2015 Power Conference, POWER 2015, collocated with the ASME 2015 9th International Conference on Energy Sustainability, the ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2015 Nuclear Forum. American Society of Mechanical Engineers (ASME), Vol. 2015-January.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooling
Turbulence
Blow molding
Liquid crystals
Fans

Experimental investigations of the effect of scheme exit height and double row injection on the film cooling performance of a micro tangential jet scheme, part II: Suction side

Hassan, O. & Hassan, I., 2015, ASME 2015 Power Conference, POWER 2015, collocated with the ASME 2015 9th International Conference on Energy Sustainability, the ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2015 Nuclear Forum. American Society of Mechanical Engineers (ASME), Vol. 2015-January.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooling
Blow molding
Liquid crystals
Ducts
Heat transfer coefficients

Experimental measurement of single-phase liquid heat transfer in a curved microtube using thermochromic liquid crystal

You, Q., Fan, Y. & Hassan, I., 1 Jan 2015, 2nd International Conference on Fluid Flow, Heat and Mass Transfer, FFHMT 2015. Avestia Publishing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid Crystals
Liquid crystals
Heat transfer
Heat flux
Liquids
1 Citation (Scopus)

Prediction of heat transfer coefficient in annular flow regime for flow boiling in a horizontal micro tube at a uniform heat flux

Younes, A., Kadem, L. & Hassan, I., 1 Jan 2015, 2nd International Conference on Fluid Flow, Heat and Mass Transfer, FFHMT 2015. Avestia Publishing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Heat transfer coefficients
Heat flux
Liquid films
Heat transfer
2014
1 Citation (Scopus)

Experimental investigation of film cooling performance for a new shaped hole at the leading edge

Elnady, T. & Hassan, I., 2014, Simple and Combined Cycles; Advanced Energy Systems and Renewables (Wind, Solar and Geothermal); Energy Water Nexus; Thermal Hydraulics and CFD; Nuclear Plant Design, Licensing and Construction; Performance Testing and Performance Test Codes; Student Paper Competition. American Society of Mechanical Engineers (ASME), Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer coefficients
Cooling
Coolants
Thermal load
Blow molding
2013
11 Citations (Scopus)

Aero-thermal optimization and experimental verification for the discrete film cooling of a turbine airfoil

El Ayoubi, C., Hassan, O., Ghaly, W. & Hassan, I., 2013, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, GT 2013. Vol. 3.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airfoils
Turbines
Cooling
Aerodynamics
Coolants

Experimental flow field investigations downstream a film cooling scheme over a flat plate using the PIV technique

Hassan, O. & Hassan, I., 2013, Advances in Aerodynamics. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Velocity measurement
Flow fields
Cooling
Blow molding
Vorticity

Experimental flow field investigations of nozzle film cooling scheme on a flat plate using stereo PIV

Zheng, Y. & Hassan, I., 2013, ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013. Vol. 3. V003T08A013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nozzles
Flow fields
Cooling
Vortex flow
Blow molding

New predictive methodology for the onset of flow instability in single horizontal microtube with an inlet orifice

Fan, Y. & Hassan, I., 2013, ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013. Vol. 1. V001T03A015

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orifices
Heating
Pressure drop
Heat flux
Intake systems
1 Citation (Scopus)

The effect of inlet orifice on critical heat flux and flow boiling heat transfer in single horizontal microtube

Fan, Y. & Hassan, I., 2013, ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013. Vol. 1. V001T03A016

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Orifices
Boiling liquids
Heat flux
Heat transfer
Heat transfer coefficients
2012
1 Citation (Scopus)

An analytical model of flow boiling heat transfer for slug flow in a single circular horizontal micro-channel

Younes, A. M. & Hassan, I., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. Vol. 7. p. 941-948 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Boiling liquids
Analytical models
Vapors
Heat transfer
Liquid films
1 Citation (Scopus)

Experimental investigation of double rows film cooling on vane pressure side

Elnady, T., Hassan, I., Kadem, L. & Lucas, T., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. Vol. 7. p. 1917-1926 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer coefficients
Cooling
Blow molding
Coolants
Stators
2 Citations (Scopus)

Experimental investigations of the film cooling performance of a micro-tangential-jet scheme on a gas turbine vane, part I: Effectiveness

Hassan, O. & Hassan, I., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. Vol. 1. p. 385-395 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas turbines
Cooling
Coolants
Thermal load
Blow molding
2 Citations (Scopus)

Experimental investigations of the film cooling performance of a micro-tangential-jet scheme on a gas turbine vane, part II: Heat transfer coeficient

Hassan, O. & Hassan, I., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. Vol. 1. p. 397-407 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas turbines
Heat transfer
Cooling
Heat transfer coefficients
Heat flux
5 Citations (Scopus)

Optimization of film cooling holes on the suction surface of a high pressure turbine blade

El Ayoubi, C., Ghaly, W. & Hassan, I., 2012, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, GT 2012. PARTS A AND B ed. Vol. 4. p. 1683-1693 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Turbines
Cooling
Aerodynamics
Coolants
2011

Experimental investigation of a scaled-up passive curved channel micromixer with slanted grooves

Cook, K. J. & Hassan, I., 2011, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011. Vol. 2. p. 111-117 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Secondary flow
Flow patterns
Vortex flow
Rotational flow
Flow visualization
1 Citation (Scopus)

Experimental investigation of a scaled-up passive interdigital micromixer with circular-sector mixing elements

Cook, K., Fan, Y. F. & Hassan, I., 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reynolds number
Advection
Flow visualization
Flow patterns
Vortex flow

Experimental investigation of louver cooling scheme on gas turbine vane suction side

Elnady, T., Hassan, O., Hassan, I., Kadem, L. & Lucas, T., 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A AND B ed. Vol. 5. p. 315-323 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas turbines
Cooling
Blow molding
Mach number
Temperature distribution

Experimental investigation of two-phase flow in a multi-branch reduced T-junction with co-current stratified gas-liquid flow

Bowden, R. & Hassan, I., 2011, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Air entrainment
Two phase flow
Froude number
Liquids
Flow visualization

Impact of aortic prosthetic heart valve dysfunction on left ventricular afterload and on the accuracy of echo-doppler measurements

Smadi, O., Keshavarz-Motamed, Z., Hassan, I., Pibarot, P. & Kadem, L., 2011, ASME 2011 Summer Bioengineering Conference, SBC 2011. PARTS A AND B ed. p. 189-190 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heart valve prostheses

Investigation of cooling performance of a swirl microchannel heat sink by numerical simulation

Fan, Y. & Hassan, I., 2011, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011. Vol. 1. p. 463-469 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Microchannels
Cooling
Heat flux
Computer simulation

Numerical simulation of a novel jet-impingement micro heat sink with cross flow under non uniform heating condition

Fan, Y. & Hassan, I., 2011, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011. Vol. 1. p. 441-449 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Heat flux
Heating
Computer simulation
Microchannels

Numerical study of microchannel heat sinks with non-uniform heat flux conditions

Ling, L., Fan, Y. & Hassan, I., 2011, ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2011. Vol. 2. p. 87-93 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Microchannels
Heat flux
Heating
Temperature

Numerical study of MicroChannel liquid cooling under uniform and non-uniform heating conditions

Ling, L., Fan, Y. & Hassan, I., 2011, IMETI 2011 - 4th International Multi-Conference on Engineering and Technological Innovation, Proceedings. Vol. 1. p. 39-42 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat sinks
Microchannels
Cooling
Heat flux
Heating

Smoothed particle hydrodynamics simulation of flow through a bileaflet mechanical heart valve: Advantages and prospects

Shahriari, S., Maleki, H., Hassan, I. & Kadem, L., 2011, ASME 2011 Summer Bioengineering Conference, SBC 2011. PARTS A AND B ed. p. 221-222 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydrodynamics
2010

A hybrid model for predicting gas entrainment in a small branch from a co-current flowing gas-liquid regime

Bowden, R., Saleh, W. & Hassan, I., 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. Vol. 1. p. 1363-1371 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Air entrainment
Liquids
Gases
Analytical models
Boundary conditions

An experimental investigation of a new hybrid film cooling scheme

Ghorab, M., Hassan, I. & Lucas, T., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 5. p. 311-320 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooling
Blow molding
Liquid Crystals
Secondary flow
Airfoils
2 Citations (Scopus)

An experimental investigation of film cooling performance of louver scheme

Ghorab, M., Hassan, I. & Lucas, T., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 5. p. 301-310 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooling
Airfoils
Blow molding
Liquid Crystals
Secondary flow

Bileaflet prosthetic heart valve disease: Numerical approach using 3-D fluid-structure interaction model with realistic aortic root

Smadi, O., Hassan, I., Pibarot, P. & Kadem, L., 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. Vol. 1. p. 1901-1906 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heart valve prostheses
Fluid structure interaction
Prosthetics
Pressure gradient
Turbulence

Co-current stratified gas-liquid flow in a horizontal pipe with discharging branches

Bowden, R., Saleh, W. F. & Hassan, I., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART C ed. American Society of Mechanical Engineers (ASME), Vol. 9. p. 1795-1802 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pipe
Liquids
Gases
Phase measurement
Discharge (fluid mechanics)
2 Citations (Scopus)

Experimental investigation of film cooling effectiveness for a new shaped hole at the leading edge

Elnady, T., Hassan, I., Kadem, L. & Lucas, T., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. Vol. 7. p. 1495-1504 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cooling
Blow molding
Coolants
Cascades (fluid mechanics)
Liquid crystals

Experimental investigation of flow boiling heat transfer characteristics of FC-72 in cross-linked microchannel heat sinks using thermochromatic liquid crystals

Megahed, A., Hassan, I. & Cook, K., 2010, Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009. Vol. 2. p. 1-7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid Crystals
Heat sinks
Microchannels
Liquid crystals
Boiling liquids
2 Citations (Scopus)

Experimental investigation of louver cooling scheme on gas turbine vane pressure side

Elnady, T., Saleh, W., Hassan, I., Kadem, L. & Lucas, T., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 5. p. 159-167 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gas turbines
Cooling
Blow molding
Heat transfer coefficients
Liquid Crystals

Numerical investigation and geometric parameterization of lamination inlet of passive micromixer

Fan, Y. & Hassan, I., 2010, ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B ed. p. 1213-1219 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Parameterization
Reynolds number
Biochemistry
Microchannels
Vortex flow

Numerical simulation of a novel passive micromixer with curved cahnnel and slanted grooves

Fan, Y. & Hassan, I., 2010, ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting, ICNMM2010. PARTS A AND B ed. p. 1203-1212 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microchannels
Computer simulation
Reynolds number
Pressure drop
Vortex flow
2 Citations (Scopus)

Numerical study of film cooling scheme on a blunt-nosed body in hypersonic flow

Kim, S. I. & Hassan, I., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. Vol. 7. p. 267-276 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hypersonic flow
Cooling
Aerodynamic heating
Hypersonic aerodynamics
Angle of attack
1 Citation (Scopus)

The numerical investigation of an interdigital micromixer with circular sector obstacles

Feng Fan, Y. & Hassan, I., 2010, Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009. Vol. 1. p. 209-216 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reynolds number
Advection
Microchannels
Pressure drop
Vortex flow
7 Citations (Scopus)

Unsteady tip leakage flow characteristics and heat transfer on turbine blade tip and casing

Md. Rahman, H., Kim, S. I., Hassan, I. & El Ayoubi, C., 2010, ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010. PARTS A, B, AND C ed. Vol. 7. p. 2353-2362 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Turbines
Heat transfer
Flow structure
Rotors
2 Citations (Scopus)

Validation of a smoothed particle hydrodynamics code for internal flow simulations: Application to hemodynamics in a realistic left heart cavity model

Shahriari, S., Hassan, I. & Kadem, L., 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. Vol. 1. p. 355-360 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow simulation
Hemodynamics
Reynolds number
Hydrodynamics
Flow patterns
2009

Computational study of the effects of shock waves on film cooling effectiveness

Zhang, C. X. Z. & Hassan, I., 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. Vol. 7. p. 855-866 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shock waves
Cooling
Blow molding
Airfoils
Wave effects
1 Citation (Scopus)

Conjugate heat transfer and film cooling of a multi-stage cooling scheme

Ghorab, M., Kim, S. I. & Hassan, I., 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008. PART B ed. Vol. 10. p. 1249-1257 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer
Cooling
Coolants
Blow molding
Turbomachine blades
6 Citations (Scopus)

Effect of turbine inlet temperature on blade tip leakage flow and heat transfer

Kim, S. I., Rahman, M. H. & Hassan, I., 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART B ed. Vol. 7. p. 1773-1782 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Intake systems
Turbomachine blades
Turbines
Heat transfer
Temperature
1 Citation (Scopus)

Experimental investigation of the two-phase phenomena in a small discharge installed on a large pipe with stratified gas-liquid flow

Bowden, R., Saleh, W. F. & Hassan, I., 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. Vol. 1. p. 839-849 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Discharge (fluid mechanics)
Gases
Pipe
Air entrainment
Liquids