If you made any changes in Pure these will be visible here soon.

Research Output 2009 2019

Filter
Article
2019

Flexural Response of an Aluminum Foam Core/Stainless Steel Facesheet Sandwich Composite

Shunmugasamy, V. C. & Mansoor, B., 1 Jan 2019, In : JOM.

Research output: Contribution to journalArticle

Stainless Steel
Aluminum
Foams
Stainless steel
Composite materials
3 Citations (Scopus)

Improved mechanical properties induced by In and In & Zn double additions to eutectic Sn58Bi alloy

Zhou, S., Shen, Y. A., Uresti, T., Shunmugasamy, V. C., Mansoor, B. & Nishikawa, H., 1 Jan 2019, In : Journal of Materials Science: Materials in Electronics.

Research output: Contribution to journalArticle

eutectic alloys
Eutectics
mechanical properties
softening
Mechanical properties
2018
6 Citations (Scopus)

Aluminum foam sandwich with density-graded open-cell core: Compressive and flexural response

Shunmugasamy, V. C. & Mansoor, B., 25 Jul 2018, In : Materials Science and Engineering A. 731, p. 220-230 11 p.

Research output: Contribution to journalArticle

Aluminum
foams
Foams
aluminum
cells

Bifurcation in deformation mechanism to overcome strength-ductility paradox in metal-ceramic multilayer thin-films

Mungole, T., Mansoor, B., Ayoub, G. & Field, D. P., 3 Sep 2018, In : Applied Physics Letters. 113, 10, 101902.

Research output: Contribution to journalArticle

paradoxes
ductility
ceramics
thin films
metals
10 Citations (Scopus)

Compressive behavior of a rolled open-cell aluminum foam

Shunmugasamy, V. C. & Mansoor, B., 7 Feb 2018, In : Materials Science and Engineering A. 715, p. 281-294 14 p.

Research output: Contribution to journalArticle

Aluminum
foams
strain rate
Foams
casts
9 Citations (Scopus)

Corrosion mechanism in PVD deposited nano-scale titanium nitride thin film with intercalated titanium for protecting the surface of silicon

Chaudhry, A. U., Mansoor, B., Mungole, T., Ayoub, G. & Field, D. P., 20 Feb 2018, In : Electrochimica Acta. 264, p. 69-82 14 p.

Research output: Contribution to journalArticle

Titanium nitride
Physical vapor deposition
Silicon
Titanium
Corrosion
1 Citation (Scopus)

Friction Stir Welding of Low-Carbon AISI 1006 Steel: Room and High-Temperature Mechanical Properties

Shunmugasamy, V. C., Mansoor, B., Ayoub, G. & Hamade, R., 1 Apr 2018, In : Journal of Materials Engineering and Performance. 27, 4, p. 1673-1684 12 p.

Research output: Contribution to journalArticle

Friction stir welding
Steel
Welds
Carbon
Metals
19 Citations (Scopus)

Improvement in the mechanical properties of eutectic Sn58Bi alloy by 0.5 and 1 wt% Zn addition before and after thermal aging

Zhou, S., Mokhtari, O., Rafique, M. G., Shunmugasamy, V. C., Mansoor, B. & Nishikawa, H., 15 Oct 2018, In : Journal of Alloys and Compounds. 765, p. 1243-1252 10 p.

Research output: Contribution to journalArticle

Thermal aging
Eutectics
Zinc
Mechanical properties
Microstructure

Structure and growth of core–shell nanoprecipitates in Al–Er–Sc–Zr–V–Si high-temperature alloys

Nasim, W., Yazdi, S., Santamarta, R., Malik, J., Erdeniz, D., Mansoor, B., Seidman, D. N., Dunand, D. C. & Karaman, I., 1 Jan 2018, (Accepted/In press) In : Journal of Materials Science.

Research output: Contribution to journalArticle

Superalloys
Transmission electron microscopy
Defects
High resolution transmission electron microscopy
Melting point
2 Citations (Scopus)

The effect of layer thickness ratio on the plastic deformation mechanisms of nanoindented Ti/TiN nanolayered composite

Yang, W., Ayoub, G., Salehinia, I., Mansoor, B. & Zbib, H., 1 Nov 2018, In : Computational Materials Science. 154, p. 488-498 11 p.

Research output: Contribution to journalArticle

thickness ratio
Plastic Deformation
Dislocation
plastic deformation
Piles
2017
3 Citations (Scopus)

Bifurcation in deformation behavior of Cu and Ta by accumulative roll-bonding at high temperature

Mungole, T., Mansoor, B., Ayoub, G. & Field, D. P., 15 Jul 2017, In : Scripta Materialia. 136, p. 87-91 5 p.

Research output: Contribution to journalArticle

Roll bonding
plane strain
textures
recovery
shear
36 Citations (Scopus)

Deformation mechanisms in Ti/TiN multilayer under compressive loading

Yang, W., Ayoub, G., Salehinia, I., Mansoor, B. & Zbib, H., 1 Jan 2017, In : Acta Materialia. 122, p. 99-108 10 p.

Research output: Contribution to journalArticle

Dislocations (crystals)
Multilayers
Molecular dynamics
Plastic deformation
Cermets
6 Citations (Scopus)

Effect of Temperature on Microstructure and Fracture Mechanisms in Friction Stir Welded Al6061 Joints

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R. F. & Imad, A., 1 Jun 2017, In : Journal of Materials Engineering and Performance. 26, 6, p. 2542-2554 13 p.

Research output: Contribution to journalArticle

Welds
Friction
Microstructure
Friction stir welding
Aluminum alloys
28 Citations (Scopus)

Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys

Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., Vo, N. Q., Karaman, I., Mansoor, B., Seidman, D. N. & Dunand, D. C., 1 Feb 2017, In : Acta Materialia. 124, p. 501-512 12 p.

Research output: Contribution to journalArticle

Vanadium
Microstructural evolution
Alloying
Precipitates
Creep
8 Citations (Scopus)

Mullins effect in polyethylene and its dependency on crystal content: A network alteration model

Makki, M., Ayoub, G., Abdul-Hameed, H., Zaïri, F., Mansoor, B., Naït-Abdelaziz, M. & Ouederni, M., 1 Nov 2017, In : Journal of the Mechanical Behavior of Biomedical Materials. 75, p. 442-454 13 p.

Research output: Contribution to journalArticle

Polyethylene
Polyethylenes
Crystals
Low density polyethylenes
Constitutive models
13 Citations (Scopus)

Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation

Yang, W., Ayoub, G., Salehinia, I., Mansoor, B. & Zbib, H., 15 Aug 2017, In : Acta Materialia. 135, p. 348-360 13 p.

Research output: Contribution to journalArticle

Laminates
Multilayers
Compaction
Cermets
Plasticity
2016
19 Citations (Scopus)

A comparative study of image analysis and porometry techniques for characterization of porous membranes

AlMarzooqi, F. A., Bilad, M. R., Mansoor, B. & Arafat, H. A., 1 Feb 2016, In : Journal of Materials Science. 51, 4, p. 2017-2032 16 p.

Research output: Contribution to journalArticle

Image analysis
Membranes
Pore size
polycarbonate
Surface roughness
10 Citations (Scopus)
Phase change materials
Desalination
Thermal energy
Thermodynamic properties
Energy storage
36 Citations (Scopus)

Effect of strain rate and temperature on fracture of magnesium alloy AZ31B

Rodriguez, A. K., Ayoub, G. A., Mansoor, B. & Benzerga, A. A., 15 Jun 2016, In : Acta Materialia. 112, p. 194-208 15 p.

Research output: Contribution to journalArticle

Magnesium alloys
Strain rate
Temperature
Magnesium
Failure modes
1 Citation (Scopus)

Magnesium recovery from brines using exopolymeric substances of sulfate-reducing bacteria

Wan, A. M., Mansoor, B. & Ahmad, F., 13 Nov 2016, In : Desalination and Water Treatment. 57, 53, p. 25747-25756 10 p.

Research output: Contribution to journalArticle

Brines
sulfate-reducing bacterium
Magnesium
magnesium
Bacteria
50 Citations (Scopus)

Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061

Dorbane, A., Mansoor, B., Ayoub, G., Shunmugasamy, V. C. & Imad, A., 10 Jan 2016, In : Materials Science and Engineering A. 651, p. 720-733 14 p.

Research output: Contribution to journalArticle

friction stir welding
Friction stir welding
microhardness
Welds
mechanical properties
20 Citations (Scopus)

Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R. F., Kridli, G., Shabadi, R. & Imad, A., 1 Jan 2016, In : Materials Science and Engineering A. 649, p. 190-200 11 p.

Research output: Contribution to journalArticle

welding
casts
Welds
friction
crack initiation
2015
3 Citations (Scopus)

Cellular Magnesium Matrix Foam Composites for Mechanical Damping Applications

Shunmugasamy, V. C., Mansoor, B. & Gupta, N., 23 Oct 2015, (Accepted/In press) In : JOM.

Research output: Contribution to journalArticle

Magnesium
Foams
Damping
Composite materials
Magnesium alloys
169 Citations (Scopus)

Functional graphene nanosheets: The next generation membranes for water desalination

Mahmoud, K., Mansoor, B., Mansour, A. & Khraisheh, M., 5 Jan 2015, In : Desalination. 356, p. 208-225 18 p.

Research output: Contribution to journalArticle

Graphite
Nanosheets
Desalination
Graphene
membrane
11 Citations (Scopus)

Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R., Kridli, G. & Imad, A., 9 Jan 2015, In : Materials Science and Engineering A. 624, p. 239-249 11 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
crack initiation
Crack initiation
damage
9 Citations (Scopus)

The effect of hot rolling on the microstructure, texture and mechanical properties of twin roll cast AZ31Mg

Young, J. P., Ayoub, G., Mansoor, B. & Field, D. P., 2015, In : Journal of Materials Processing Technology. 216, p. 315-327 13 p.

Research output: Contribution to journalArticle

Hot Rolling
Hot rolling
Mechanical Properties
Texture
Microstructure
11 Citations (Scopus)

Three dimensional forming of compressed open-cell metallic foams at elevated temperatures

Mansoor, B., Nassar, H., Shunmugasamy, V. C. & Khraisheish, M. K., 5 Mar 2015, In : Materials Science and Engineering A. 628, p. 433-441 9 p.

Research output: Contribution to journalArticle

foams
Foams
cells
casts
Temperature
2014
6 Citations (Scopus)

Effect of oxygen vacancy on the improved photocatalytic activity of Cr -doped TiO2

Khan, M., Li, J., Cao, W., Mansoor, B. & Rehman, F., 10 Oct 2014, In : International Journal of Modern Physics B. 28, 25, 1450170.

Research output: Contribution to journalArticle

oxygen
electromagnetic absorption
anatase
optical properties
defects
2013
84 Citations (Scopus)

Effect of dry-out on the fouling of PVDF and PTFE membranes under conditions simulating intermittent seawater membrane distillation (SWMD)

Guillen-Burrieza, E., Thomas, R., Mansoor, B., Johnson, D., Hilal, N. & Arafat, H., 1 Jul 2013, In : Journal of Membrane Science. 438, p. 126-139 14 p.

Research output: Contribution to journalArticle

Distillation
fouling
distillation
polytetrafluoroethylene
Polytetrafluoroethylene
93 Citations (Scopus)

Effect of temperature-dependent microstructure evolution on pore wetting in PTFE membranes under membrane distillation conditions

Saffarini, R. B., Mansoor, B., Thomas, R. & Arafat, H. A., 5 Feb 2013, In : Journal of Membrane Science. 429, p. 282-294 13 p.

Research output: Contribution to journalArticle

Distillation
distillation
wetting
Wetting
membranes
14 Citations (Scopus)

Photo-regenerable multi-walled carbon nanotube membranes for the removal of pharmaceutical micropollutants from water

Zaib, Q., Mansoor, B. & Ahmad, F., Aug 2013, In : Environmental Sciences: Processes and Impacts. 15, 8, p. 1582-1589 8 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Ibuprofen
drug
Adsorption
membrane
45 Citations (Scopus)
Numerical Investigation
Experimental Investigation
Friction
Strain rate
Strain Rate
2012
49 Citations (Scopus)

Microstructure and tensile behavior of a friction stir processed magnesium alloy

Mansoor, B. & Ghosh, A. K., Aug 2012, In : Acta Materialia. 60, 13-14, p. 5079-5088 10 p.

Research output: Contribution to journalArticle

Magnesium alloys
Textures
Friction
Microstructure
Processing
2009
17 Citations (Scopus)

Microstructure and porosity in thixomolded Mg alloys and minimizing adverse effects on formability

Mansoor, B., Mukherjee, S. & Ghosh, A., 25 Jun 2009, In : Materials Science and Engineering A. 512, 1-2, p. 10-18 9 p.

Research output: Contribution to journalArticle

Formability
Porosity
porosity
microstructure
Microstructure