If you made any changes in Pure these will be visible here soon.

Research Output 2009 2019

2019

Attention Assessment: Evaluation of Facial Expressions of Children with Autism Spectrum Disorder

Banire, B., Al Thani, D., Makki, M., Qaraqe, M., Anand, K., Connor, O., Khowaja, K. & Mansoor, B., 1 Jan 2019, Universal Access in Human-Computer Interaction. Multimodality and Assistive Environments - 13th International Conference, UAHCI 2019, Held as Part of the 21st HCI International Conference, HCII 2019, Proceedings. Antona, M. & Stephanidis, C. (eds.). Springer Verlag, p. 32-48 17 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11573 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Facial Expression
Disorder
Virtual reality
Evaluation
Biomarkers

Effects of In and Zn double addition on eutectic Sn-58Bi alloy

Zhou, S., Shen, Y. A., Nishikawa, H., Uresti, T., Shunmugasamy, V. C. & Mansoor, B., 1 May 2019, Proceedings - IEEE 69th Electronic Components and Technology Conference, ECTC 2019. Institute of Electrical and Electronics Engineers Inc., p. 1081-1086 6 p. 8811187. (Proceedings - Electronic Components and Technology Conference; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Eutectics
Elongation
Microstructure
Thermal aging
Nanoindentation

Flexural Response of an Aluminum Foam Core/Stainless Steel Facesheet Sandwich Composite

Shunmugasamy, V. C. & Mansoor, B., 1 Jan 2019, In : JOM.

Research output: Contribution to journalArticle

Stainless Steel
Aluminum
Foams
Stainless steel
Composite materials
3 Citations (Scopus)

Improved mechanical properties induced by In and In & Zn double additions to eutectic Sn58Bi alloy

Zhou, S., Shen, Y. A., Uresti, T., Shunmugasamy, V. C., Mansoor, B. & Nishikawa, H., 1 Jan 2019, In : Journal of Materials Science: Materials in Electronics.

Research output: Contribution to journalArticle

eutectic alloys
Eutectics
mechanical properties
softening
Mechanical properties

Magnesium-Based Bioresorbable Stent Materials: Review of Reviews

Aljihmani, L., Alic, L., Boudjemline, Y., Hijazi, Z. M., Mansoor, B., Serpedin, E. & Qaraqe, K., 1 Mar 2019, In : Journal of Bio- and Tribo-Corrosion. 5, 1, 26.

Research output: Contribution to journalReview article

Stents
Magnesium
Corrosion
Cardiology
Mechanical properties

Remote monitoring of absorbable cardiovascular stents using millimetre waves

Abbas, H. T., Abbasi, Q. H., Aljihmani, L. N., Boudjemline, Y., Hijazi, Z., Mansoor, B. & Qaraqe, K. A., Aug 2019, ISWCS 2019 - 16th International Symposium on Wireless Communication Systems. VDE Verlag GmbH, p. 450-451 2 p. 8877268. (Proceedings of the International Symposium on Wireless Communication Systems; vol. 2019-August).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stents
Millimeter waves
integrity
monitoring
Monitoring

The Influence of Temperature and Medium on Corrosion Response of ZE41 and EZ33

AbdelGawad, M., Chaudhry, A. U. & Mansoor, B., 1 Jan 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (eds.). Springer International Publishing, p. 159-167 9 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion
Corrosion resistance
Temperature
Biodegradability
Rare earth elements
2018
6 Citations (Scopus)

Aluminum foam sandwich with density-graded open-cell core: Compressive and flexural response

Shunmugasamy, V. C. & Mansoor, B., 25 Jul 2018, In : Materials Science and Engineering A. 731, p. 220-230 11 p.

Research output: Contribution to journalArticle

Aluminum
foams
Foams
aluminum
cells

Bifurcation in deformation mechanism to overcome strength-ductility paradox in metal-ceramic multilayer thin-films

Mungole, T., Mansoor, B., Ayoub, G. & Field, D. P., 3 Sep 2018, In : Applied Physics Letters. 113, 10, 101902.

Research output: Contribution to journalArticle

paradoxes
ductility
ceramics
thin films
metals
10 Citations (Scopus)

Compressive behavior of a rolled open-cell aluminum foam

Shunmugasamy, V. C. & Mansoor, B., 7 Feb 2018, In : Materials Science and Engineering A. 715, p. 281-294 14 p.

Research output: Contribution to journalArticle

Aluminum
foams
strain rate
Foams
casts
1 Citation (Scopus)

Corrosion characteristics of two rare earth containing magnesium alloys

AbdelGawad, M., Mansoor, B. & Chaudhry, A. U., 1 Jan 2018, Magnesium Technology 2018. Springer International Publishing, p. 43-53 11 p. (Minerals, Metals and Materials Series; vol. Part F7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium alloys
Rare earths
Rare earth elements
Magnesium
Corrosion
9 Citations (Scopus)

Corrosion mechanism in PVD deposited nano-scale titanium nitride thin film with intercalated titanium for protecting the surface of silicon

Chaudhry, A. U., Mansoor, B., Mungole, T., Ayoub, G. & Field, D. P., 20 Feb 2018, In : Electrochimica Acta. 264, p. 69-82 14 p.

Research output: Contribution to journalArticle

Titanium nitride
Physical vapor deposition
Silicon
Titanium
Corrosion

Equal channel angular pressing of a newly developed precipitation hardenable scandium containing aluminum alloy

Malik, J., Nasim, W., Mansoor, B., Karaman, I., Erdeniz, D., Dunand, D. C. & Seidman, D. N., 1 Jan 2018, Light Metals 2018. Springer International Publishing, p. 423-429 7 p. (Minerals, Metals and Materials Series; vol. Part F4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Scandium
Equal channel angular pressing
Aluminum alloys
Microhardness
Thermodynamic stability
1 Citation (Scopus)

Friction Stir Welding of Low-Carbon AISI 1006 Steel: Room and High-Temperature Mechanical Properties

Shunmugasamy, V. C., Mansoor, B., Ayoub, G. & Hamade, R., 1 Apr 2018, In : Journal of Materials Engineering and Performance. 27, 4, p. 1673-1684 12 p.

Research output: Contribution to journalArticle

Friction stir welding
Steel
Welds
Carbon
Metals
19 Citations (Scopus)

Improvement in the mechanical properties of eutectic Sn58Bi alloy by 0.5 and 1 wt% Zn addition before and after thermal aging

Zhou, S., Mokhtari, O., Rafique, M. G., Shunmugasamy, V. C., Mansoor, B. & Nishikawa, H., 15 Oct 2018, In : Journal of Alloys and Compounds. 765, p. 1243-1252 10 p.

Research output: Contribution to journalArticle

Thermal aging
Eutectics
Zinc
Mechanical properties
Microstructure

Structure and growth of core–shell nanoprecipitates in Al–Er–Sc–Zr–V–Si high-temperature alloys

Nasim, W., Yazdi, S., Santamarta, R., Malik, J., Erdeniz, D., Mansoor, B., Seidman, D. N., Dunand, D. C. & Karaman, I., 1 Jan 2018, (Accepted/In press) In : Journal of Materials Science.

Research output: Contribution to journalArticle

Superalloys
Transmission electron microscopy
Defects
High resolution transmission electron microscopy
Melting point
2 Citations (Scopus)

The effect of layer thickness ratio on the plastic deformation mechanisms of nanoindented Ti/TiN nanolayered composite

Yang, W., Ayoub, G., Salehinia, I., Mansoor, B. & Zbib, H., 1 Nov 2018, In : Computational Materials Science. 154, p. 488-498 11 p.

Research output: Contribution to journalArticle

thickness ratio
Plastic Deformation
Dislocation
plastic deformation
Piles

Transmission Kikuchi diffraction from nano-crystalline Ti and TiN thin-films

Mungole, T., Zhang, J., Mansoor, B., Ayoub, G. & Field, D. P., 18 Jun 2018, In : IOP Conference Series: Materials Science and Engineering. 375, 1, 012009.

Research output: Contribution to journalConference article

Diffraction
Crystalline materials
Thin films
Textures
Electron diffraction

Use of mixed reality tools in introductory materials science courses

Mansoor, B., Makki, M. J. & Al-Thani, D., 23 Jun 2018, In : ASEE Annual Conference and Exposition, Conference Proceedings. 2018-June

Research output: Contribution to journalConference article

Materials science
Students
Visualization
Application programs
Teaching
2017
3 Citations (Scopus)

Bifurcation in deformation behavior of Cu and Ta by accumulative roll-bonding at high temperature

Mungole, T., Mansoor, B., Ayoub, G. & Field, D. P., 15 Jul 2017, In : Scripta Materialia. 136, p. 87-91 5 p.

Research output: Contribution to journalArticle

Roll bonding
plane strain
textures
recovery
shear

Corrigendum to “Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys” [Acta Materialia 124 (2017) 501–512](S1359645416309004)(10.1016/j.actamat.2016.11.033)

Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., Vo, N. Q., Karaman, I., Mansoor, B., Seidman, D. N. & Dunand, D. C., 1 Jul 2017, In : Acta Materialia. 133, 1 p.

Research output: Contribution to journalComment/debate

Vanadium
Microstructural evolution
Alloying
Creep
Compressive stress
36 Citations (Scopus)

Deformation mechanisms in Ti/TiN multilayer under compressive loading

Yang, W., Ayoub, G., Salehinia, I., Mansoor, B. & Zbib, H., 1 Jan 2017, In : Acta Materialia. 122, p. 99-108 10 p.

Research output: Contribution to journalArticle

Dislocations (crystals)
Multilayers
Molecular dynamics
Plastic deformation
Cermets
6 Citations (Scopus)

Effect of Temperature on Microstructure and Fracture Mechanisms in Friction Stir Welded Al6061 Joints

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R. F. & Imad, A., 1 Jun 2017, In : Journal of Materials Engineering and Performance. 26, 6, p. 2542-2554 13 p.

Research output: Contribution to journalArticle

Welds
Friction
Microstructure
Friction stir welding
Aluminum alloys
28 Citations (Scopus)

Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys

Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., De Luca, A., Vo, N. Q., Karaman, I., Mansoor, B., Seidman, D. N. & Dunand, D. C., 1 Feb 2017, In : Acta Materialia. 124, p. 501-512 12 p.

Research output: Contribution to journalArticle

Vanadium
Microstructural evolution
Alloying
Precipitates
Creep

Friction stir welding on light-weight metal - Aluminum alloy AI6061

Shunmugasamy, V. C. & Mansoor, B., 2017, THERMEC 2016. Trans Tech Publications Ltd, Vol. 879. p. 1233-1238 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction stir welding
Friction stir welding
aluminum alloys
Aluminum alloys
Metals

Lightweight aluminum foams - Tailoring compressive property through relative density variation

Shunmugasamy, V. C. & Mansoor, B., 1 Jan 2017, Materials Science and Technology Conference and Exhibition 2017, MS and T 2017. Association for Iron and Steel Technology, AISTECH, Vol. 1. p. 61-67 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
Foams
Strain rate
Metals
Sandwich structures
8 Citations (Scopus)

Mullins effect in polyethylene and its dependency on crystal content: A network alteration model

Makki, M., Ayoub, G., Abdul-Hameed, H., Zaïri, F., Mansoor, B., Naït-Abdelaziz, M. & Ouederni, M., 1 Nov 2017, In : Journal of the Mechanical Behavior of Biomedical Materials. 75, p. 442-454 13 p.

Research output: Contribution to journalArticle

Polyethylene
Polyethylenes
Crystals
Low density polyethylenes
Constitutive models
13 Citations (Scopus)

Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation

Yang, W., Ayoub, G., Salehinia, I., Mansoor, B. & Zbib, H., 15 Aug 2017, In : Acta Materialia. 135, p. 348-360 13 p.

Research output: Contribution to journalArticle

Laminates
Multilayers
Compaction
Cermets
Plasticity
2016
19 Citations (Scopus)

A comparative study of image analysis and porometry techniques for characterization of porous membranes

AlMarzooqi, F. A., Bilad, M. R., Mansoor, B. & Arafat, H. A., 1 Feb 2016, In : Journal of Materials Science. 51, 4, p. 2017-2032 16 p.

Research output: Contribution to journalArticle

Image analysis
Membranes
Pore size
polycarbonate
Surface roughness
10 Citations (Scopus)
Phase change materials
Desalination
Thermal energy
Thermodynamic properties
Energy storage
36 Citations (Scopus)

Effect of strain rate and temperature on fracture of magnesium alloy AZ31B

Rodriguez, A. K., Ayoub, G. A., Mansoor, B. & Benzerga, A. A., 15 Jun 2016, In : Acta Materialia. 112, p. 194-208 15 p.

Research output: Contribution to journalArticle

Magnesium alloys
Strain rate
Temperature
Magnesium
Failure modes
3 Citations (Scopus)

Friction stir welding of AZ31B magnesium alloy with 6061-T6 aluminum alloy: Influence of processing parameters on microstructure and mechanical properties

Mansoor, B., Dorbane, A., Ayoub, G. & Imad, A., 1 Jan 2016, Friction Stir Welding and Processing VIII. Springer International Publishing, p. 259-266 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Friction stir welding
Magnesium alloys
Joining
Aluminum alloys
Welds
1 Citation (Scopus)

Magnesium recovery from brines using exopolymeric substances of sulfate-reducing bacteria

Wan, A. M., Mansoor, B. & Ahmad, F., 13 Nov 2016, In : Desalination and Water Treatment. 57, 53, p. 25747-25756 10 p.

Research output: Contribution to journalArticle

Brines
sulfate-reducing bacterium
Magnesium
magnesium
Bacteria
50 Citations (Scopus)

Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061

Dorbane, A., Mansoor, B., Ayoub, G., Shunmugasamy, V. C. & Imad, A., 10 Jan 2016, In : Materials Science and Engineering A. 651, p. 720-733 14 p.

Research output: Contribution to journalArticle

friction stir welding
Friction stir welding
microhardness
Welds
mechanical properties
20 Citations (Scopus)

Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R. F., Kridli, G., Shabadi, R. & Imad, A., 1 Jan 2016, In : Materials Science and Engineering A. 649, p. 190-200 11 p.

Research output: Contribution to journalArticle

welding
casts
Welds
friction
crack initiation
2015

Cationic (V, Y)-codoped TiO2 with enhanced visible light induced photocatalytic activity for photoelectrochemical applications

Khan, M., Cao, W. & Mansoor, B., 2015, Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015. John Wiley and Sons Inc., p. 325-333 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Light absorption
Doping (additives)
Yttrium
Vanadium
Point defects
3 Citations (Scopus)

Cellular Magnesium Matrix Foam Composites for Mechanical Damping Applications

Shunmugasamy, V. C., Mansoor, B. & Gupta, N., 23 Oct 2015, (Accepted/In press) In : JOM.

Research output: Contribution to journalArticle

Magnesium
Foams
Damping
Composite materials
Magnesium alloys
1 Citation (Scopus)

Evolution of microstructure and microtexture in a Cu/Ta multilayer during accumulative roll-bonding at high temperature

Mungole, T., Mansoor, B., Ayoub, G. & Field, D. P., 2015, Materials Science and Technology Conference and Exhibition 2015, MS and T 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 1503-1510 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Roll bonding
Multilayers
Microstructure
Temperature
Textures
2 Citations (Scopus)

Friction stir welding of AZ31B magnesium alloy with 6061-T6 aluminum alloy: Influence of processing parameters on microstructure and mechanical properties

Mansoor, B., Dorbane, A., Ayoub, G. & Imad, A., 2015, Friction Stir Welding and Processing VIII - Held During TMS 2015 144th Annual Meeting and Exhibition. Minerals, Metals and Materials Society, Vol. 2015-January. p. 259-266 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

friction stir welding
Friction stir welding
magnesium alloys
Magnesium alloys
Joining
169 Citations (Scopus)

Functional graphene nanosheets: The next generation membranes for water desalination

Mahmoud, K., Mansoor, B., Mansour, A. & Khraisheh, M., 5 Jan 2015, In : Desalination. 356, p. 208-225 18 p.

Research output: Contribution to journalArticle

Graphite
Nanosheets
Desalination
Graphene
membrane
1 Citation (Scopus)

Mechanical response and evolution of damage of Al 6061-T6 under different strain rates and temperatures

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R., Kridli, G. & Imad, A., 2015, Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015. John Wiley and Sons Inc., p. 259-265 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain rate
Microstructure
Electron microscopes
Scanning
Tensile testing
11 Citations (Scopus)

Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures

Dorbane, A., Ayoub, G., Mansoor, B., Hamade, R., Kridli, G. & Imad, A., 9 Jan 2015, In : Materials Science and Engineering A. 624, p. 239-249 11 p.

Research output: Contribution to journalArticle

strain rate
Strain rate
crack initiation
Crack initiation
damage

Strengthening in thermomechanically processed magnesium alloys

Mansoor, B., Decker, R. F. & LeBeau, S. E., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Minerals, Metals and Materials Society, Vol. 2015-January. p. 225-230 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strengthening (metal)
Magnesium alloys
Ductility
Microstructure
Formability
6 Citations (Scopus)

Teaching innovation with technology to accelerate engineering students' learning

Alaeddine, N. I., Parsaei, H., Kakosimos, K., Guo, B. & Mansoor, B., 2015, 122nd ASEE Annual Conference and Exposition: Making Value for Society. American Society for Engineering Education

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Teaching
Innovation
Students
Educational technology
Education
9 Citations (Scopus)

The effect of hot rolling on the microstructure, texture and mechanical properties of twin roll cast AZ31Mg

Young, J. P., Ayoub, G., Mansoor, B. & Field, D. P., 2015, In : Journal of Materials Processing Technology. 216, p. 315-327 13 p.

Research output: Contribution to journalArticle

Hot Rolling
Hot rolling
Mechanical Properties
Texture
Microstructure
11 Citations (Scopus)

Three dimensional forming of compressed open-cell metallic foams at elevated temperatures

Mansoor, B., Nassar, H., Shunmugasamy, V. C. & Khraisheish, M. K., 5 Mar 2015, In : Materials Science and Engineering A. 628, p. 433-441 9 p.

Research output: Contribution to journalArticle

foams
Foams
cells
casts
Temperature
2014
6 Citations (Scopus)

Effect of oxygen vacancy on the improved photocatalytic activity of Cr -doped TiO2

Khan, M., Li, J., Cao, W., Mansoor, B. & Rehman, F., 10 Oct 2014, In : International Journal of Modern Physics B. 28, 25, 1450170.

Research output: Contribution to journalArticle

oxygen
electromagnetic absorption
anatase
optical properties
defects
2013
84 Citations (Scopus)

Effect of dry-out on the fouling of PVDF and PTFE membranes under conditions simulating intermittent seawater membrane distillation (SWMD)

Guillen-Burrieza, E., Thomas, R., Mansoor, B., Johnson, D., Hilal, N. & Arafat, H., 1 Jul 2013, In : Journal of Membrane Science. 438, p. 126-139 14 p.

Research output: Contribution to journalArticle

Distillation
fouling
distillation
polytetrafluoroethylene
Polytetrafluoroethylene
93 Citations (Scopus)

Effect of temperature-dependent microstructure evolution on pore wetting in PTFE membranes under membrane distillation conditions

Saffarini, R. B., Mansoor, B., Thomas, R. & Arafat, H. A., 5 Feb 2013, In : Journal of Membrane Science. 429, p. 282-294 13 p.

Research output: Contribution to journalArticle

Distillation
distillation
wetting
Wetting
membranes
14 Citations (Scopus)

Photo-regenerable multi-walled carbon nanotube membranes for the removal of pharmaceutical micropollutants from water

Zaib, Q., Mansoor, B. & Ahmad, F., Aug 2013, In : Environmental Sciences: Processes and Impacts. 15, 8, p. 1582-1589 8 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Ibuprofen
drug
Adsorption
membrane